Page 206 - NICCONS - LISTINO 2022
P. 206
Tubo Yuston Yuston pipe
TUBO YUSTON TUBO YUSTON
Yuston pipe Yuston pipe
Grado di impermeabilità e Adatto per l'uso dei seguenti gas/
anticondensazione / suitable for use with gas:
Degree of
impermeability and
anticondensation
µ>5000
R410A, R422D,
R407C,R32,R314A, PRESSIONE/PRESSURE
R404.
max 1450 psi /
POLIETILENE ESPANSO A CELLULE CHIUSE/
max 99,98 bar
TRECCIA IN FIBRA POLIMERO BARRIERA/ Closed-cell polyethylene insulation Eccellente resistenza
SINTETICA / High barrier polymer agenti atmosferici /
Synthetic fiber braid Excellent resistance
to atmospheric
agents
POLIAMMIDE LONG-CHAIN/
Long-chain polyamide
RIVESTIMENTO ESTERNO ANTI UV /
Anti-uv external coating
Normative:
Temperatura di
UNI EN 1736:2009
esercizio / UNI 8457-UNI 9174
FILM DI ALLUMINIO A 4 STRATI/ RIVESTIMENTO ANTI-UV E ANTI-IR/ Operating temperature: UNI EN 1382:2014-UL
4 layers aluminium film Anti-UV and Anti-IR coating -30°C/110°C (-22F/230F) 94:2001
Su richiesta è possibile fornire le certificazioni / Upon request it is possible to provide certifications
Yuston helps you save up to 70% of the time needed
Yuston ti aiuta a risparmiare fino al 70% del tempo
VELOCE fast necessario per il collegamento del sistema di climatiz- to connect your air conditioning system. Yuston is the JOB No. 171026/1_B RAPPORTO DI PROVA - TEST REPORT
zazione. Yuston è il tubo flessibile multistrato termo-
flexible multilayer thermoplastic pipe that can be used
plastico che può essere utilizzato come la migliore
as the best alternative to copper pipe.
Vs. rif.: prev. NBCPR4IT02171026
Data 30/10/2017
ordine del 12/09/2017 – order of 12/09/2017
NICCONS ITALY S.r.l.
Richiedente
alternativa al tubo di rame.
Via dell’Economia, 85 - 36100 VICENZA (VI) – ITALIA
Applicant
Yuston makes you forget about the bending machi-
Tubo 1/4”, 3/8”, 1/2" sistema Yuston by Niccons s.r.l. con raccordi
di estremità. Lunghezza campioni 1000 mm
Prodotto - Descrizione
Tube 1/4", 3/8”,1/2” Yuston by Niccons s.r.l. system with end
Product - Description
fittings samples length 1000 mm
ne, the flattened pipe for a wrong bend and even the
Yuston ti fa dimenticare la piegatrice, il tubo appiattito
Prove richieste
n.9 prove di scoppio
Required Test
No 9 burst tests
UNI EN 1736:2009
Impianti di refrigerazione e pompe di calore. Elementi flessibili delle tubazioni,
Norma di riferimento
isolatori di vibrazioni, giunti di dilatazione e tubi non metallici
per una piega sbagliata e persino gli scarti causati da
waste caused by installation errors. Its flexibility is
Requisiti, progettazione ed installazione.
Standard Reference
Refrigerating systems and heat pumps. Flexible pipe elements, vibration
isolators, expansion joints and non-metallic tubes. Requirements, design and
installation.
riportati da pag. 2 / reported on page 2
Metodo di prova / Test Method
unrivalled. You can even tie it..and untie it!
errori nell’installazione. La sua flessibilità non ha rivali.
Periodo di prova / Testing time
28/09/2017 ÷ 30/09/2017
Risultati / Results
riportati nelle pagine seguenti / reported on the following pages
Puoi anche legarlo..e slegarlo! Il Tecnico di Laboratorio Per. Ind. Samuele Mantella
The laboratory technician
Il Responsabile di Settore D.ssa Geol. Annarita Sacco
Sector Manager
Il presente rapporto di prova, riproducibile nella sua sola stesura integrale, si riferisce al solo prodotto esaminato.
This test report refers only to the tested items and it can be reproduced only in its full version.
Materiale ricevuto in data 12/09/2017 – Campionamento eseguito dal Richiedente
Material received on 12/09/2017 - Sampling carried out by the Applicant
Valori desunti da Rapporto di Prova JOB n.171026/1 - 30/10/2017
Values derived from Test Report JOB n.171026/1 - 30/10/2017
1/6
Sede operativa/Headquarter: Via Moscova, 11 - 20017 RHO (MI) ITALY - Sede legale/Registered site: Via Leopardi, 14 - 20123 MILANO (MI) ITALY
Tel. +39.02.97071.800 - Fax. +39.02.930.8176 - www.mitesting.org - info@mitesting.org
Capitale sociale Euro 26.000,00 - R.E.A. Milano 798508 - Reg. Impr. Milano 00862210150
Le informazioni contenute in questo documento sono proprietà di MIT International Testing S.r.l. e non possono essere copiate o comunicate a
terze parti o utilizzate per scopi diversi da quelli per i quali viene fornito senza il consenso scritto di MIT International Testing S.r.l.
The information in this document is the property of MIT International Testing S.r.l. and may not be copied or communicated to a third party or
used for any purpose other than that for which it is supplied without the express written consent of MIT International Testing S.r.l.
SICURO safe L’innovazione del tubo Yuston è anche evidente dai The innovation of Yuston is also evident from its techi- JOB No. 171026/3_B Data 13/11/2017 Vs. rif.: prev. NBCPR4IT02171026
RAPPORTO DI PROVA - TEST REPORT
ordine del 12/09/2017 – order of 12/09/2017
NICCONS ITALY S.r.l.
Richiedente
suoi dati tecnici: utilizzabile con tutti i più popolari
cal data: usable with all the most popular Freon gases
Via dell’Economia, 85 - 36100 VICENZA (VI) – ITALIA
Applicant
Tubo 1/4”, 3/8”, 1/2" sistema Yuston by Niccons s.r.l. con raccordi
Prodotto - Descrizione
di estremità.
Tube 1/4", 3/8”,1/2” Yuston by Niccons s.r.l. system with end
Product - Description
fittings
gas Freon sul mercato (incluso R32); resistenza da -30
on the market (including R32); resistance from -30°C
Prove richieste
n. 6 prove di resistenza ciclica (impulso)
Required Test
n. 6 cyclic endurance tests (impulse)
UNI EN 1736:2009
Impianti di refrigerazione e pompe di calore. Elementi flessibili delle tubazioni,
° C fino a picchi di 130 ° C, 110 ° continui e adatto a
(-22F )up to peaks of 130°C (266F), 110°C (230F) continuo-
Norma di riferimento
isolatori di vibrazioni, giunti di dilatazione e tubi non metallici
Requisiti, progettazione ed installazione.
Standard Reference
Refrigerating systems and heat pumps. Flexible pipe elements, vibration
isolators, expansion joints and non-metallic tubes. Requirements, design and
installation.
riportati da pag. 2 / reported on page 2
Metodo di prova / Test Method
us and suitable for pressures up to 80 bar/ 1160 psi
pressioni fino a 80 bar / 1160 psi (certificato per 100 bar
09/10/2017 ÷ 27/10/2017
Periodo di prova / Testing time
Risultati / Results
riportati nelle pagine seguenti / reported on the following pages
/ 1450 psi).
(certified for 100 bar/1450 psi).
Per. Ind. Samuele Mantella
Il Tecnico di Laboratorio
The laboratory technician
Il Responsabile di Settore
D.ssa Geol. Annarita Sacco
Sector Manager
Il presente rapporto di prova, riproducibile nella sua sola stesura integrale, si riferisce al solo prodotto esaminato.
This test report refers only to the tested items and it can be reproduced only in its full version.
Materiale ricevuto in data 12/09/2017 – Campionamento eseguito dal Richiedente
Material received on 12/09/2017 - Sampling carried out by the Applicant
1/3
Sede operativa/Headquarter: Via Moscova, 11 - 20017 RHO (MI) ITALY - Sede legale/Registered site: Via Leopardi, 14 - 20123 MILANO (MI) ITALY
Tel. +39.02.97071.800 - Fax. +39.02.930.8176 - www.mitesting.org - info@mitesting.org
Capitale sociale Euro 26.000,00 - R.E.A. Milano 798508 - Reg. Impr. Milano 00862210150
Le informazioni contenute in questo documento sono proprietà di MIT International Testing S.r.l. e non possono essere copiate o comunicate a
terze parti o utilizzate per scopi diversi da quelli per i quali viene fornito senza il consenso scritto di MIT International Testing S.r.l.
The information in this document is the property of MIT International Testing S.r.l. and may not be copied or communicated to a third party or
used for any purpose other than that for which it is supplied without the express written consent of MIT International Testing S.r.l.
Vs. rif.: prev. NBCPR4IT00171455
INNOVATIVO innovative È flessibile, si adatta a ogni curva e angolo. It is flexible and it adapts to every curve and angle. Valori desunti da Rapporto di Prova JOB n.171455 - 30/10/2017 1/9
RAPPORTO DI PROVA - TEST REPORT
JOB No. 171455/2
Data/Date 30/10/2017
ordine del 28/09/2017
NICCONS ITALY S.r.l.
Richiedente
Via dell’Economia, 85 - 36100 VICENZA (VI) – ITALIA
Applicant
Tubo termoplastico multistrato isolato per gas refrigeranti
Prodotto Identificazione e descrizione
Yuston by Niccons s.r.l. 1/4” 3/8” 1/2"
Product Identification and description
Insulated multilayer thermoplastic pipe for refrigerant gas
Yuston by Niccons s.r.l. 1/4” 3/8” 1/2"
È leggero, pratico e veloce da posizionare nel canale
n.1 prova di reazione al fuoco
It is also light, practical and quick to place in the
Prove richieste
n.1 reaction to fire test
Required test
UL 94:2001
-
-
Norma di riferimento
UNI EN 13823:2014
-
Reference standard
UNI EN 11925-2:2010
o sotto traccia.
UNI EN 13238:2010
channel or under the wall.
-
Periodo di prova
29/09/2017 ÷ 13/10/2017
Testing time
riportati nelle pagine seguenti
Risultati
Results
The kit is already threaded and dimensioned.
reported on the following pages
Il kit è già filettato e dimensionato.
Il Tecnico di Laboratorio
Per. Maurizio Biagini
Laboratory Technician
Il Responsabile di Settore
D.ssa Geol. Annarita Sacco
Sector Manager
Il sistema soddisfa tutti i requisiti di installazione.
The system meets all installation requirements.
Il presente rapporto di prova, riproducibile nella sua sola stesura integrale, si riferisce al solo prodotto esaminato.
This test report refers only to the tested items and it can be reproduced only in its full version.
Materiale ricevuto in data 29/09/2017 – Campionamento eseguito dal Richiedente
It’s entirely MADE IN ITALY!
Material received on 29/09/2017 - Sampling carried out by the Applicant
E’ interamente MADE IN ITALY!
Values derived from Test Report JOB n.171455 - 30/10/2017
Sede operativa/Headquarter: Via Moscova, 11 - 20017 RHO (MI) ITALY - Sede legale/Registered site: Via Leopardi, 14 - 20123 MILANO (MI) ITALY
Tel. +39.02.97071.800 - Fax. +39.02.930.8176 - www.mitesting.org - info@mitesting.org
Capitale sociale Euro 26.000,00 - R.E.A. Milano 798508 - Reg. Impr. Milano 00862210150
Le informazioni contenute in questo documento sono proprietà di MIT International Testing S.r.l. e non possono essere copiate o comunicate a
terze parti o utilizzate per scopi diversi da quelli per i quali viene fornito senza il consenso scritto di MIT International Testing S.r.l.
The information in this document is the property of MIT International Testing S.r.l. and may not be copied or communicated to a third party or
used for any purpose other than that for which it is supplied without the express written consent of MIT International Testing S.r.l.
204 MADE IN ITALY MADE IN ITALY 205