Page 171 - OLI - OLIFLEX
P. 171
NEW 2023
Fire protection Fire protection Fire protection Plus 400 Plus 400 Plus 400
Fire Protection Plus 400
Il sistema brevettato OLI ex Fire Protection Plus 400 nasce per soddisfare le esigenze della bioedilizia,
dell’ef cientamento e del risparmio energetico, in risposta all’utilizzo sempre più frequente di materiali isolanti
dagli spessori importanti, sia nelle pareti ma soprattutto nei tetti e nei solai. Testato in laboratorio secondo gli
standard della norma europea EN 13216-1, sia con temperatura costante a 700°C, sia a 1000°C per 30 minuti,
nella con gurazione di tipo “C senza parete di chiusura” (EN 1443), può essere installato a diretto contatto con
solai e tetti in legno e materiale combustibile. Adatto per pacchetti isolanti con spessori no a 400 mm di contatto
diretto e non ventilato. Il sistema di attraversamento tetto/solaio va sempre abbinato ad un elemento lineare
OLI ex D.P. inox 25.
The patented OLIflex Fire Protection Plus 400 system was created to meet the needs of green building, efficiency
and energy saving, in response to the increasingly frequent use of thick insulating materials, both in walls but
above all in roofs and attics. Tested in the laboratory according to the standards of the European standard
EN 13216-1, both with a constant temperature of 700°C and at 1000°C for 30 minutes, in the configuration of
type “C without closing wall” (EN 1443), it can be installed in direct contact with attics and roofs made of wood
and combustible material. Suitable for insulation packages up to 400mm thick in direct, unventilated contact.
The roof/attic crossing system must always be combined with an OLIflex D.P. inox 25 linear element.
UNI EN
T600 G00 13216-1 400 mm F1P2C F2P2C PELLET
1000°C
WC100 E0
Documentazione online
Documentation online
www.oli-world.com 169
169
www.oli-world.com